Bezel Blanks - HP Pro 3000 SFF Maintenance And Service Manual

Bezel Blanks

1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. While facing the inside of the front bezel, press the two retaining tabs on the right towards the
outer edge of the bezel (1) and pull the bezel blank inwards to remove it (2).
Figure 7-3
(Access Panel on page
(Front Bezel on page
Removing a Bezel Blank
(Preparation for Disassembly on page
85).
86).
84).
Bezel Blanks 87