HP Pro 3000 SFF Maintenance And Service Manual page 119

NOTE: The 3.5-inch drive bay may contain a diskette drive or a media card reader.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Disconnect the drive cables.
a. If you are removing a diskette drive (available on some models only), disconnect the data
cable and power cable from the back of the drive.
b. If you are removing a media card reader, disconnect the USB cable from the system board.
5. Rotate the drive cage all the way up.
Figure 7-28 Rotating the Drive Cage Up
(Preparation for Disassembly on page
(Access Panel on page
(Front Bezel on page 86).
85).
84).
Drives 109