Direct-To-Navigation (Pfd); Operations - Garmin G900X Pilot's Manual

GPS NAVIGATION

5.6 DIRECT-TO-NAVIGATION (PFD)

Section 5.3 describes the PFD Inset Map and PFD Windows. It is recommended that the user read this
NOTE:
section before beginning GPS navigation operations on the PFD.
1
2
3
4
5

OPERATIONS

A direct-to waypoint can be selected in the following ways:
• By identifier, waypoint location or facility name
• From a list of waypoints in the active flight plan
• From a list of 25 nearest airports
The PFD Direct-to window is enabled and disabled by pressing the Direct-to Key (
selected waypoint displays the information shown in Figure 5-40.
Direct-to Navigation from the PFD:
1) Select the Direct-to Key (
2) Turn the large FMS Knob to place the cursor in the desired selection field.
5-46
9
Figure 5-40 PFD Direct-to Window
Identifier
1
2 Facility Name
3 VNV Altitude Constraint
4 Bearing From Waypoint
Course to Selected
5
Waypoint
) .
Garmin G900X Pilot's Guide
6 City and State
7 Along Track Offset
8 Distance to Waypoint
9 Waypoint Symbol
6
7
8
) . The currently
190-00726-00 Rev. A