Garmin G900X Pilot's Manual page 320

GPS NAVIGATION
Selecting a departure for the departure airport:
1) Display the Procedures Window by pressing the PROC Key.
2) Highlight 'SELECT DEPARTURE'.
3) Press the ENT Key.
4) Enter an identifier, city, or facility name.
5) Press the ENT Key until the departure field is highlighted.
6) Select the desired departure.
7) Press the ENT Key. A window appears listing the available transitions for the departure.
8) Select the desired transition or vectors.
9) Press the ENT Key. A window appears listing the available runways for the departure.
10) Select the desired runway.
11) With 'LOAD?' highlighted, press the ENT Key to load the departure.
SELECT ARRIVAL
'SELECT ARRIVAL' selects a published standard terminal arrival route (STAR) for the destination airport or
replaces a current arrival with a new selection.
Available
Arrivals
Selecting an arrival for a direct-to or flight plan destination airport:
1) Display the Procedures Window by pressing the PROC Key.
2) Highlight 'SELECT ARRIVAL'.
3) Press the ENT Key.
4) Enter an identifier, city, or facility name.
5) Press the ENT Key until the arrival field is highlighted.
6) Select the desired arrival.
5-162
Figure 5-155 Selecting an Arrival
Garmin G900X Pilot's Guide
Available
Transitions
190-00726-00 Rev. A