Garmin G900X Pilot's Manual page 313

Approach Display
Load and/or activate an approach procedure:
1) Press the PROC Key.
2) Highlight 'SELECT APPROACH'.
3) Press the ENT Key. A list of available approaches for the destination airport is displayed.
4) Turn the FMS Knob to highlight the desired approach. The WAAS channel and ID for the selected approach
procedure are displayed in the 'APPROACH CHANNEL' field.
5) Press the ENT Key. A list of available transitions for the selected approach procedure is now displayed.
6) Turn either FMS Knob to selected the desired transition. The "Vectors" option assumes vectors are received
to the final course segment of the approach and provides navigation guidance relative to the final approach
course.
190-00726-00 Rev. A
Figure 5-148 Selecting an Approach
Garmin G900X Pilot's Guide
GPS NAVIGATION
Available
Approaches
5-155