Tas Alerts - Garmin G900X Pilot's Manual

TAS ALERTS

Refer to the TAS600 documentation for information on alerts generated by the TAS equipment.
NOTE:
When the number of TAs on the Traffic Map Page increases from one scan to the next, the following occur:
• A 'TRAFFIC' Annunciation appears to the top left of the Attitude Indicator on the PFD, flashing for 5 seconds
and remaining displayed until no TAs are detected in the area.
• The PFD Inset Map is automatically displayed with traffic.
Inset Map
Displays When
TA is Detected
Aural traffic alerts generated by the TAS600-series, even those in progress, can be suspended manually. If
muting is turned off, the system annunciates all traffic voice alerts which were issued while the system was
muted.
Muting/generating TAS voice alerts:
1) Select the Traffic Map Page.
2) Select the MUTE Softkey.
OR :
a) Press the MENU Key.
b) Select 'Mute On' (shown if muting is currently off) and press the ENT Key.
3) Select the MUTE Softkey again to turn traffic voice alerting on and annunciate all muted traffic voice alerts
issued during system muting.
OR :
a) Press the MENU Key.
b) Select 'Mute Off (shown if muting is currently on) and press the ENT Key.
190-00726-00 Rev. A
Figure 6-70 Traffic Annunciation (PFD)
Garmin G900X Pilot's Guide
HAZARD AVOIDANCE
6-55