Garmin G900X Pilot's Manual page 37

OFF
• OBS
• CDI
• XPDR
STBY
ON
ALT
GND
VFR
CODE
0 — 7
BKSP
• IDENT
• TMR/REF
• NRST
• ALERTS
0
190-00726-00 Rev. A
DCLTR TRAFFIC TOPO
DCLTR-1
DCLTR-2
DCLTR-3
Selects OBS Mode on the CDI when navigating by GPS (only available with active leg)
Cycles through GPS, VOR1, and VOR2 navigation sources on the HSI
PFD
Displays transponder mode selection softkeys:
Selects standby mode (Transponder does not reply to any interrogations)
Selects Mode A (Transponder replies to interrogations)
Selects Mode C – altitude reporting mode (Transponder replies to identification and altitude
DFLTS WIND BRG 1
interrogations)
Manually selects Ground Mode (Transponder does not allow Mode A and Mode C
replies, but does permit acquisition squitter and replies to discretely addressed Mode S
interrogations)
Automatically enters the VFR code (1200 in U.S.A. only)
Displays transponder code selection softkeys 0-7
Use numbers to enter code
Removes numbers entered, one at a time
Activates the Special Position Identification (SPI) pulse for 18 seconds, identifying the
transponder return on the ATC screen
Displays/removes Timer/References Window
Displays/removes Nearest Airports Window
OPTN1 OPTN2 OPTN3
Displays/removes Alerts Window
STBY ON ALT
1 2 3 4
Figure 1-20 XPDR Softkeys
Garmin G900X Pilot's Guide
TERRAIN NEXRAD XM LTNG
Press the OFF or BACK Softkey
to return to the top-level softkeys.
HSI FMT BRG 2 ALT UNIT
Select the BRG1/BRG2 Select the STD BARO or BACK
softkeys to display/remove Softkey to return to the top-level
the Bearing Information softkeys.
windows and cycle through
bearing sources:
- NAV1/NAV2
- GPS
360 HSI ARC HSI
METERS IN HPA
OFF
XPDR
GND VFR CODE IDENT
5 6 7 IDENT
BACK ALERTS
SYSTEM OVERVIEW
STD BARO BACK ALERTS
BACK ALERTS
BACK ALERTS
BACK ALERTS
BACK ALERTS
Select the BACK Softkey to
return to the top-level softkeys.
BKSP BACK ALERTS
Select the IDENT or BACK
Softkey to return to the top-
level softkeys.
1-25