Garmin G900X Pilot's Manual page 275

5) V4 is now made the active leg of the flight plan.
a) Press the FMS Knob to activate the cursor.
b) Turn the large FMS Knob to highlight SLN. The TO waypoint of the leg is selected in order to activate the leg.
c) Select the ACT LEG Softkey. The confirmation window is now displayed as in Figure 5-101. Note the TOP to
SLN leg is actually part of V4.
d) Verify the displayed leg is the desired leg and press the ENT Key. Note in Figure 5-102, the magenta Map
Pointer in the flight plan window and magenta line on the map indicating V4 is now the active flight plan leg.
Note also, the crosstrack (XTK) distance on the HSI indicating 16.9 nm to the intercept point.
190-00726-00 Rev. A
Figure 5-100 V4 is Loaded in the Flight Plan
Figure 5-101 Comfirm Active Leg
Garmin G900X Pilot's Guide
GPS NAVIGATION
5-117