Garmin G900X Pilot's Manual page 194

GPS NAVIGATION
• Active navigation flight plan
• Track vector
• Wind direction/speed
• Latitude/longitude lines
• NAV range ring
• Fuel range ring (reserve; the fuel reserve rings are enabled and disabled from the MFD only)
• Obstacles data
• Potential Terrain Proximity/obstacle impact data (TAWS)
The following Inset Map operations can be performed (operations are performed independently of the
MFD):
• Changing the zoom range
• Changing the declutter level
• Map panning
• Topo
• Traffic
• Terrain Proximity
• Stormscope
• NEXRAD
• Lightning
To change the Inset Map zoom range, turn the Joystick clockwise to increase or counterclockwise to decrease
the range. Zoom ranges from 500 feet to 2,000 nautical miles. To change the declutter level, select the INSET
Softkey. Select the DCLTR Softkey to remove background map details until the desired amount of detail is
displayed. The declutter level appears in the softkey (i.e., DCLTR-1).
Panning the map:
1) Push the Joystick to display the Map Pointer. The map can now move beyond its current limits without adjusting
the range.
2) Move the Joystick to pan the map in the general direction of the desired location. When the pointer is placed
on an object, the name of the object is highlighted for approximately 4 seconds (even if the name was not
originally displayed on the map). This feature applies to everything displayed on the map except for route
lines.
3) Push the Joystick to cancel the panning function and re-center the map on the aircraft's current position.
5-36 Garmin G900X Pilot's Guide 190-00726-00 Rev. A