Specifying A Course To A Waypoint; Canceling Direct-To Navigation - Garmin G900X Pilot's Manual

GPS NAVIGATION

SPECIFYING A COURSE TO A WAYPOINT

When navigating a direct-to, the G900X sets a direct great circle course to the selected destination. The course
to a destination can also be manually selected using the course field ('COURSE') on the Direct-to Waypoint
Window.
Manually selecting a direct-to course:
1) Press the Direct-to Key. The Direct-to Window is displayed with the destination field highlighted.
2) Highlight the course field.
3) Enter the desired course (Figure 5-34).
4) Press the ENT Key twice to begin navigation using the selected destination and course.
5) To reselect a direct course from the present position (or select a new manually defined course) press the
Direct-to Key. Press the ENT Key twice.

CANCELING DIRECT-TO NAVIGATION

Once a direct-to is activated, the G900X provides navigation guidance to the selected destination until the
direct-to is either replaced with a new direct-to or flight plan, cancelled, or when the G900X is powered off.
Cancelling a direct-to:
1) Press the Direct-to Key to display the Direct-to Window. Press the MENU Key.
2) With 'Cancel Direct-To NAV' highlighted (Figure 5-35), press the ENT Key. If a flight plan is still active, the
G900X resumes navigating the flight plan along the closest leg.
5-42
Figure 5-34 Entering a Direct-to Course
Figure 5-35 Cancel Direct-to Option
Garmin G900X Pilot's Guide 190-00726-00 Rev. A