Garmin G900X Pilot's Manual page 316

GPS NAVIGATION
8) Highlight 'LOAD?' or 'ACTIVATE?'. 'LOAD' adds the approach to the flight plan without immediately using the
approach for navigation guidance. This allows for the original flight plan to continue navigating until cleared
for the approach, but keeps the approach available for quick activation when needed. 'ACTIVATE' adds the
approach to the flight plan and begins navigating the approach course.
9) If the approach is not approved for GPS, a 'NOTAPPROVED FOR GPS' message is displayed with 'YES' highlighted.
Press the ENT Key to acknowledge the message. To cancel the approach, select 'NO' and press the ENT Key.
OR :
1) From the Approach Loading Page, highlight the 'CHANNEL' field.
WAAS Channel Field
2) Enter the desired channel number.
3) Press the ENT Key. The TRANSITION window is displayed.
4) Select a transition (the 'VECTORS' option assumes vectors are received to the final course segment of the
approach and provides navigation guidance relative to the final approach course).
5) Press the ENT Key.
5-158
Figure 5-151 WAAS Channel Selection
Garmin G900X Pilot's Guide 190-00726-00 Rev. A