Auto-Tuning The Com Frequency - Garmin G900X Pilot's Manual

AUTO-TUNING THE COM FREQUENCY

COM frequencies can be automatically tuned from the following:
• Nearest Airports Window (PFD)
• WPT – Airport Information Page
• NRST – Nearest Airports Page
AUTO-TUNING FROM THE PFD
COM frequencies for the nearest airports can be automatically tuned from the Nearest Airports Window on
the PFD. When the desired frequency is entered, it becomes a standby frequency. Pressing the Frequency
Transfer Key places this frequency into the COM Active Frequency Field.
Auto-tuning a COM frequency for a nearby airport from the PFD:
1) Select the NRST Softkey on the PFD to open the Nearest Airports Window. A list of 25 nearest airport identifiers
and COM frequencies is displayed.
2) Turn the FMS Knob to scroll through the list and highlight the desired COM frequency.
3) Press the ENT Key to load the COM frequency into the COM Standby Tuning Box.
4) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.
190-00726-00 Rev. A
Figure 4-8 Nearest Airports Window (PFD)
Garmin G900X Pilot's Guide
• NRST – Nearest (ARTCC, FSS, WX) Frequencies Page
• NRST – Nearest Airspaces Page
AUDIO PANEL AND CNS
Select the NRST
Softkey to Open
the Nearest
Airports Window
4-9