Loading a pilot control lighting frequency into selected COM standby frequency:
1) With the Airport Information Page displayed, press the FMS Knob to activate the cursor.
2) Move the cursor to the 'PCL FREQ' field in the Runways Window.
3) Press the ENT Key to place the PCL frequency in the standby field of the COM window.
4) Press the FMS Knob to remove the cursor.
The airport runway information field displays runway designations, length, surface type and lighting for
the selected airport. A map image of the runway layout and surrounding area is also displayed on the Airport
Information Page. The map image range is displayed in the lower left corner and is adjustable using the
joystick. For airports with multiple runways, information for each runway is available.
190-00726-00 Rev. A
Figure 5-47 Viewing a Restriction
Garmin G900X Pilot's Guide
GPS NAVIGATION
5-53