Garmin G900X Pilot's Manual page 210

GPS NAVIGATION
Loading a frequency in the standby COM or NAV window:
1) With the Airport Information Page displayed, press the FMS Kno b to activate the cursor.
2) Move the cursor to the Frequencies Box.
3) Turn the FMS Knob to scroll through the list, placing the cursor on the desired frequency. If a listed frequency
has additional information for the pilot to view, the frequency is preceded by an info ('i') designation. Press the
ENT Key to view the information. The following may be displayed with the frequency:
• 'TX' – transmit only
'RX' – receive only
•
• 'PT' – part time frequency
'i' – additional information exists, press the ENT Key
•
4) Press the ENT Key to place the selected frequency in the standby field of the COM or NAV window.
5) Press the FMS Knob to remove the cursor.
The Airport Frequencies field uses the descriptions and abbreviations listed in Table 5-2:
5-52
Communication
Frequencies Which
May Include Additional
Information
Approach
Arrival
Class B
Class C
CTA
Departure
TMA
Terminal
TRSA
Table 5-2 Frequency Descriptions and Abbreviations
Garmin G900X Pilot's Guide
Communication Frequencies
Without Additional
Information
ATIS
ASOS
AWOS
Center
Clearance
Gate
Control
Ground
Helicopter
Multicom
Pre-Taxi
Radar
Ramp
Other
Tower
Unicom
Navigation
Frequencies
ILS
LOC
190-00726-00 Rev. A