Table of Contents
Advertisement
Figure 7-5 Recently Entered Waypoints List (MFD)
3) Turn the small FMS Knob to the right to display the
'RECENT' waypoints as shown in Figure 7-5.
4) Turn the large FMS Knob to select the desired
airport.
5) Press the ENT Key. The cursor is now displayed on
'ACTIVATE?'.
6) Press ENT again to activate a Direct-to.
Re-center the CDI to the Destination
Waypoint
Pr ess the Direct-to (
pressing the ENT Key twice. If a missed approach
point (MAP) is the current destination, the approach
will be canceled.
Manually Define the Active Direct-to
1) Press the Direct-to (
2) Turn the large FMS Knob to highlight the 'VNV'
altitude field.
3) Enter the desired altitude.
4) Press the ENT Key. The option to select 'MSL' or
'AGL' is now displayed.
5) Turn the small FMS Knob to select 'MSL' or 'AGL'.
6) Press the ENT Key. The cursor now highlights the
VNV offset field.
7) Enter the desired the offset distance.
8) Press the ENT Key.
190-00567-01 Rev. A
) Key, followed by
) Key.
Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
9) Turn the large FMS Knob to place the cursor in the
'COURSE' field.
10) Enter the desired course.
11) Press the ENT Key. The cursor now highlights
'ACTIVATE?'.
12) Press the ENT Key again to begin navigation using
the selected destination, altitude constraint, and
course.
Canceling Direct-to Navigation
1) Press the Direct-to (
2) Press the MENU Key to display the Direct-to options
menu.
3) With 'Cancel Direct-To NAV' highlighted, press the
ENT Key. If a flight plan is still active, the G1000
resumes navigating the flight plan along the closest
leg.
Figure 7-6 Canceling Direct-to Navigation
Direct-to Navigation from the PFD
WPT Symbol
Identifier
Facility Name
VNV Target Altitude
Bearing to WPT
Course to Selected WPT
Figure 7-7 PFD Direct-to Window
SECTION 7 – NAVIGATION
) Key.
WPT Location
Offset Distance
Distance from WPT
7-3
Advertisement
Table of Contents
