Garmin G900X Pilot's Manual page 191

Changing a field in the GPS Navigation Status Box:
1) Select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the desired field number in the MFD Data Bar Fields Box.
3) Turn the small FMS Knob to display and scroll through the data options list.
4) Select the desired data.
5) Press the ENT Key. Selecting the Defaults (DFLTS) Softkey can be used to return all fields to their defualt setting
(listed previously).
M
EASURING
The second map setup option is 'Measure Bearing/Distance' (Figure 5-22), which provides a quick and
easy method for determining the bearing and distance between any two points on the Navigation Map.
Pressing the ENT Key at any location with the 'Measure' option enabled allows bearing and distance from
the newly selected position to be acquired.
Data Fields;
Distance to Map
Pointer, Bearing to
Map Pointer, and
Elevation at Map
Pointer Location
Bearing Line
190-00726-00 Rev. A
B D
EARING AND ISTANCE
Figure 5-22 Measuring Bearing and Distance on the MFD Navigation Map
Garmin G900X Pilot's Guide
GPS NAVIGATION
5-33