Camera/Video; How To Display A Video Image - Furuno MFD12 Operator's Manual

9.

Camera/Video

The camera/video function allows you to use your unit to play back images from a vid-
eo player, on-board camera, network camera or DVD player. Network camera images
can be seen across the NavNet 3D network. A video signal can be seen only on the
MFD that receives the video signal.
A maximum of four IP cameras can connect to the Navnet system and the images
from two can be shown on the screen. You can monitor the images from two cameras
on the full screen or the 1/4 screen. You can also set the video application to show the
display of each video in turns. Further, you can also adjust the brightness, contrast
and color of each image.
9.1

How to Display a Video Image

The camera application is included in the default display selection window. Press the
DISP key to show the display selection window. Rotate the RotoKey to select the
Camera Display then push the key to validate your selection.
CAMERA
DISPLAY
9-1