Language - Furuno MFD12 Operator's Manual

Status icon
Status icon
Alphanumeric data input box
Depth Alarm Value
Slider bar
• To select a different sub menu or a different menu, rotate the RotoKey to
the left to return control to the menu selector. (You can also return the control
to the menu selector when you press the CANCEL key continuously.)
• To close the menu, press the MENU key, or use the RotoKey to click the [Exit
Menu] button at the bottom of the menu.
1.16

Language

The default interface language is American English. Language is available also in Brit-
ish English, Spanish, German, French, Italian, Portuguese, Danish, Swedish, Norwe-
gian, Finnish, Dutch, and Japanese.
1. Press the MENU key to open the menu.
2. Select the [System-General] menu.
3. Use the RotoKey to select [Language].
4. Use the RotoKey to select your language.
5. Push the RotoKey. You are asked to make sure you are ready restart. Use the
RotoKey to select Yes.
Menu item type
1. System Introduction
Procedure
Items which you can activate or deacti-
vate have a status icon. Push the
RotoKey to show the icon in green to
activate the item, or gray to deactivate.
Rotate the RotoKey to select alphanu-
meric character (A-Z, 0-9) then push
the key to validate selection. Rotate the
key right for forward alphanumeric or-
der. Rotate the key left for reverse al-
phanumeric order. To set the cursor in
a specific location, use
CursorPad.
Rotate the RotoKey to set level then
push the key to validate the setting.
or on the
1-19