Routes List - Furuno MFD12 Operator's Manual

5. Routes
5.3

Routes List

The saved routes are stored in the Routes list. The list stores the following route data
for each route:
• Name of route
• Length of route
• Number of route points
• Distance between legs and total distance
• Bearing between legs
• TTG between legs and total TTG
To show the routes list:
1. Press the MENU key to open the menu.
2. Open the [Routes] list.
3. Use the RotoKey to select the route to view.
Total = 4
Route name
Route length
The name of the route, the route's total length and its number of points are shown
in the route box at the upper left 1/4 of the screen. The location of the route is
shown on the map at the upper right 1/4 of the screen. The route information ap-
pears on the lower half of the screen.
4. Press the MENU key to close the menu.
5-6
No. of pts.
- Name of point
- Dist. between points
- Bearing to point
- TTG to point
Location of
route