How To Move A Point; How To Move An On-Screen Point; How To Move A Point From The Points List - Furuno MFD12 Operator's Manual

4. Points
4.5

How to Move a Point

You can move a point by two methods:
• Move the symbol to a new location.
• Enter new position manually on the [Points] list.
4.5.1

How to Move an On-screen Point

1. Set the cursor on the point to move. The point becomes larger if the point is se-
lected correctly.
2. Hit the right-click button to show the Point pop-up menu.
3. [Move] is selected. Push the RotoKey.
4. Use the CursorPad to move the symbol to the new location. Push the RotoKey to
put the symbol at the new location.
4.5.2

How to Move a Point from the Points List

1. Long-push the GO TO/LIST key to open the [Points] menu then open the Alpha
list.
2. Use the RotoKey to select the point to edit.
3. Push the right-click button or the RotoKey to show the Point Edit pop-up menu.
4. Rotate the RotoKey to select [Edit] then push the RotoKey. The point information
replaces the chart.
5. The [Position] combo box is selected. Push the RotoKey.
6. Enter position with the RotoKey. Push the RotoKey to select the location. Rotate
the RotoKey to select a digit then push the RotoKey to validate your selection.
7. Rotate the RotoKey to select the OK button at the bottom of the display then push
the RotoKey.
4-6
Move
Go To
Edit
Rename
Delete
New Point
Edit
Delete
Find on Map
Position