Furuno MFD12 Operator's Manual page 86

5. Select [Point Color] to change the color of the square part of the point symbol.
Seven colors are available: red, yellow, green, cyan, purple, blue, and white.
6. Select [Group] to put the point in a point group. [Fishing], [Navigation], [Danger]
and [Entertainment] are the default groups.
Navigation
Danger
Entertainment
7. [Depth] and [Water Temperature] are the depth and water temperature at the point
location. (You need depth and water temperature data to show this data.) If nec-
essary you can change this data.
8. [Avoidance Circle Area] sets the distance for the proximity alarm, which tells you
when your vessel is near a point by the distance set here. For additional informa-
tion about the proximity alarm, see the section on the chart plotter alarms.
9. Use [Comment] to enter a comment about a point. You enter a comment like you
do a Name. A comment can include a maximum of 64 alphanumeric characters.
10. The GoTo button functions to set a point as the GoTo point. Select this button then
push the RotoKey to go to the point.
11. To finish, select the OK button then push the RotoKey.
4. Points
4-9