5. Routes
5.10
Operations When You Follow a Route
5.10.1
Restart Navigation
When you follow a route, you can restart
the navigation to the next point on the
route from current location.
When you steer to keep away from an
obstruction or the vessel drifts, you go
off course as shown in Line 1 in the fig-
ure. If you do not need to return to the
original course, you can go to the point
from the current position as shown in
Line 2 in the figure.
1. Use the CursorPad to put the cursor on the dashed line of the route.
2. Push the right-click button to show the Route Follow pop-up menu.
3. Use the RotoKey to select [Restart].
The route start position for the route moves to the current position and the XTE
becomes zero.
5.10.2
Follow a Route in the Reverse Direction
You can follow a route in reverse order. This helps you return along the same path.
1. Use the CursorPad to put the cursor on the dashed line of the route.
2. Push the right-click button to show the Route Follow pop-up menu.
3. Use the RotoKey to select [Reverse].
The arrows on the route point in reverse direction.
5-12
Original course
Restart
Reverse
Extend Route
Route Info
Restart
Reverse
Extend Route
Route Info
Line 2
Line 1
Obstacle