Operations When You Follow A Route; How To Restart Navigation; How To Follow A Route In The Reverse Direction; How To Stop Following A Route - Furuno TZT9 Operator's Manual

5. ROUTES
5.9

Operations When You Follow a Route

5.9.1

How to restart navigation

When you follow a route, you can re-
start the navigation to the next route
point on the route from current location.
When you steer to keep away from an
obstruction or the ship drifts, you go off
course as shown in Line 1 in the figure.
If you do not need to return to the origi-
nal course, you can go to the route point
from the current position as shown in
Line 2 in the figure.
1. Select a route leg, the red dashed line or the yellow line of the route to display the
pop-up menu.
2. Select [Restart Nav.]. The route start position for the route moves to the current
position.
5.9.2

How to follow a route in the reverse direction

You can follow a route in reverse order. This helps you return along the same path.
Note: This function is not available for an active route.
1. Select a route leg to display the pop-up menu.
2. Select [Reverse]. The arrows on the route legs are in reverse direction and the
numbers of the route points are in reverse order.
5.9.3

How to stop following a route

1. Select a route leg, a route point or a thick red dashed line on an active route to
display the pop-up menu.
2. Select [Stop Nav.]. The arrival area, XTE lines, set course (thick red dashed line)
and yellow line are erased from the screen. The red line for the route turns the de-
fault color you set.
5.9.4

How to skip a go to point on a route

There are times when you do not need to follow all legs in an active route. You can
skip a go to point
the go to point to skip, the skipped route leg turns from red to gray.
• When you select the go to point of the active route, select [Skip] from the pop-
up menu. The selected go to point is skipped then the next route point is marked as
the go to point.
• When you select a route leg of the active route, select [Skip Wpt] from the pop-
up menu. The go to point on the route is skipped then the next route point is marked
as the go to point.
5-12
(highlighted) as shown in the procedure below. After you select
Line 1
Obstacle
Original course
Line 2