Assigning Buttons That Are Not Used To Operate Other Devices (Punch Through Function) - Denon AVR-1610 Owner's Manual

ENGLISH
Digital Video Recorder / Video Deck
Operation
mode
setting
ON/SOURCE
1
2
3
67
CHANNEL + –
MENU
uio p

ENTER
SETUP
RETURN
Default setting
(Preset code)
Special Remarks
【Special Remarks】
q Only one device can be set in the preset memory for each mode.
When a new preset code is registered, the existing code is automatically erased.
w For some brands, the DVD remote control buttons may have different function names.
Check beforehand.
0
Satellite receiver/Cable TV
or
Power on / Standby
Play
Stop
Pause
Manual search
(fast-reverse / fast-forward)
Switch channels (+, –)
Menus
Cursor operation
Enter setting
Setup
Return
Digital Video
Video Deck
Recorder
JVC HITACHI
(001) (111)
q, w
Operating Registered Devices
Operation
mode setting
ON/SOURCE
Power on / Standby
Play z
1
Pause z
3
Stop z
2
Manual search z
67
(fast-reverse / fast-forward)
CHANNEL + – Switch channels (+, –)
Cursor operation
uio p

ENTER Enter setting
MENU Guide menus
SETUP Setup
RETURN Return
Satellite
Cable TV
Receiver
Default setting
(Preset code)
Direc TV
–
(095)
Special Remarks
q
＊ : When the punch through function
(vpage 50) is set, this functions as the
button for the device for which punch
through is set.
Assigning buttons that are Not
Used to Operate Other Devices
(Punch Through Function)
When the remote control unit´s device mode is set to "TV" or "SAT/
CBL", the next "TUNER", "DVD", "HDP", "iPod", "DVR" or "VCR"
operation can be performed without switching the remote control
unit's device mode.
• One device each can be assigned to the "TV" and "SAT/CBL" device
modes.
• Assignable buttons
n Cautions during operation
When registering a punch through function, point the remote control
transmitter toward the AVR-1610. The status of the registration
operation is displayed on the AVR-1610.
1
Press or for the device
for which the punch through
function is to be registered and
simultaneously for over 2 seconds.
"RC SETUP START" appears on the
display.
2
Press the source select button for
the device to be assigned.
When registration is completed, "RC
SETUP OK" appears on the display.
b If the codes could not be registered, "RC
SETUP NG" appears on the display. Try
again.
NOTE
If the "TV" or "SAT/CBL" preset code is changed after setting the
punch through function, the punch through setting is canceled.