Dolby Pro Logic Ii X (Pro Logic Ii ) Mode - Denon AVR-3806S Operating Instructions Manual

Basic Operation
SURROUND
STANDARD ENTER PARAMETER
CURSOR
STANDARD
CURSOR
SURROUND
PARAMETER
Dolby Pro Logic
• To play in the PL
Configuration setting to "1spkr" or "2spkrs".
• To play in the PL
Amp Assign setting.
1
Press the
Pro Logic
The mode switches as shown below each time the
STANDARD button is pressed.
2
Play a program source
with the
For operating instructions, refer to the manuals of the
respective components.
3
Press the
• The surround parameter menu is displayed.
ENTER
ON SCREEN
4
Press the
play mode.
When the "SB CH OUT" parameter is set to "ON". (Set
"Sp.Back" at the System Setup to "1spkr" or "2spkrs").
II
x (Pro Logic II ) mode
II
x mode, set "Sp.Back" at the Speaker
II
x mode, set "Surround Back" at the Power
STANDARD
button to select the "Dolby
II
x" mode.
DOLBY PL II x DTS NEO:6
mark.
SURROUND PARAMETER
button.
CURSOR F F G G
or button to select the
Display
II
(Pro Logic x Cinema mode)
II
(Pro Logic x Music mode)
II
(Pro Logic x Game mode)
36
When the "SB CH OUT" parameter is set to "OFF". (Set
"Sp.Back" at the System Setup to "None").
Display
(Pro Logic
(Pro Logic
(Pro Logic
(Dolby Pro Logic mode)
5
CURSOR D D
or H H button to select the
Press the
various surround parameters.
II
Example: DOLBY PL x music mode screen
When set with the on screen display using the remote
control unit while in the MUSIC mode, set the "
" pressing the CURSOR D D or H H button, then
to "OPTIONS
0
press the CURSOR F F button.
Press the ENTER button to return to the previous screen.
Basic Operation
II Cinema mode)
II
Music mode)
II
Game mode)
" mark