Advanced Operation; Remote Control Unit; Operating Denon Audio Components - Denon AVR-3806S Operating Instructions Manual

Advanced Operation

Remote control unit

MODE
SELECTOR

Operating DENON audio components

1
MODE SELECTOR
Press the
component you want to operate.
• The icon for the selected mode flashes.
: AMP, ZONE2, ZONE3 or SYSTEM CALL
: TUNER
: DIGITAL TUNER
: SATELLITE or CABLE
: CD or CDR
: DVD or DVDR
: VCR or TAPE
: TV
This function switches as shown below each time one of
the AMP button is pressed.
Example:
Select "AMP" mode.
Select "ZONE2" mode.
AMP/LAST
buttons to select the
2
• When a remote control code is sent, the icon for the mode of
the device to which that code belongs flashes.
• When the AMP/LAST button is pressed, it is possible to switch
between the AMP mode (AMP, ZONE2, ZONE3 or SYSTEM
CALL) and the last selected non-amplifier universal mode (TU,
DTU, SAT/CBL, CD, DVD, VCR or TV).
Default state is to toggle AMP to SAT/CBL mode.
47
Advanced Operation
Select "ZONE3" mode.
Select "SYSTEM CALL" mode.
Operate the audio component.
For details, refer to the component's operating instructions.
It may not be possible to operate some models.