Specifications - Denon AVR-3806S Operating Instructions Manual

Specifications

2 Audio section
• Power amplifier
Rated output:
Dynamic power:
Output terminals:
• Analog
Input sensitivity / input impedance:
Frequency response:
S/N:
Distortion:
Rated output:
• Digital
D/A output:
Digital input:
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
RIAA deviation:
S/N:
Rated output / Maximum output:
Distortion factor:
2 Video section
• Standard video terminals
Input / output level and impedance:
Frequency response:
• S-Video terminals
Input / output level and impedance:
Frequency response:
• Color component video terminal
Input / output level and impedance:
Frequency response:
Front:
120 W + 120 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
160 W + 160 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Center:
120 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
160W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Surround (A, B):
120 W + 120 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
160 W + 160 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
120 W + 120 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
160 W + 160 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
140 W x 2 ch (8 /ohms)
210 W x 2 ch (4 /ohms)
Front, Center, Surr. Back 6 ~ 16 /ohms
Surround: A or B 6 ~ 16 /ohms
A + B 8 ~ 16 /ohms
200 mV / 47 k /kohms
10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
102 dB (DIRECT mode)
0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
1.2 V
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 96 dB
Format — Digital audio interface
2.5 mV
±1 dB (20 Hz to 20 kHz)
74 dB (A weighting, with 5 mV input)
150 mV / 8 V
0.03% (1 kHz, 3 V)
1 Vp-p, 75 /ohms
5 Hz ~ 10 MHz — +0, –3 dB
Y (brightness) signal — 1 Vp-p, 75 /ohms
C (color) signal — 0.286 Vp-p, 75 /ohms
5 Hz ~ 10 MHz — +0, –3 dB
Y (brightness) signal — 1 Vp-p, 75 /ohms
P /C signal — 0.7 Vp-p, 75 /ohms
B B
P /C signal — 0.7Vp-p, 75 /ohms
R R
5 Hz ~ 100 MHz — +0, –3 dB
2 Tuner section
Receiving Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
S/N (IHF-A):
Total Harmonic Distortion (at 1 kHz):
2 General
Power supply:
Power consumption:
Maximum external dimensions:
Mass:
2 Remote control unit (RC-1024)
Batteries:
External dimensions:
Mass:
* For purposes of improvement, specifications and design are subject to change without notice.
100
[FM]
(note: µV at 75 /ohms, 0 dBf = 1 x 10 –15 W)
87.5 MHz ~ 107.9 MHz
1.0 µV (11.2 dBf)
MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
MONO 77 dB
STEREO 72 dB
MONO 0.15%
STEREO 0.3%
AC 120 V, 60 Hz
7.1 A
434 (W) x 171 (H) x 429 (D) mm (17-3/32" x 6-47/64" x 16-57/64")
17.5 kg (38 lbs 9,30 oz)
LR6/AA Type (two batteries)
63 (W) x 238 (H) x 31 (D) mm (2-31/64" x 9-3/8" x 1-7/32")
190 g (Approx. 6.7 oz) (including batteries)
Specifications
[AM]
520 kHz ~ 1710 kHz
18 µV