Listening To The Radio; Auto Tuning; Manual Tuning - Denon AVR-3806S Operating Instructions Manual

Basic Operation

Listening to the radio

Check that the remote control unit is set to AMP or TUNER.
FUNCTION
TUNING PRESET
TUNER
MEMORY BLOCK
BAND
MODE
CHANNEL
SHIFT

Auto tuning

1
Set the input source to "TUNER".
2
Press the
the remote control unit to
select the TUNER mode.
3
Watching the display, press the
select the desired band (AM, FM or XM).
When listening to the XM Satellite Radio (
4
Press the
TUNING
mode.
MEMORY
• "Auto" appears on the display.
5
Press the
• Automatic searching begins, then stops when a station is
tuned in.
ON SCREEN
TUNER
• If tuning does not stop at the desired station, use to the
NUMBER
"Manual tuning" operation.
(Remote control unit
(Main unit)
in the AMP mode)
TUNER
button on
(Remote control unit)
BAND
button to
page 45).
MODE
button to set the auto tuning
TUNING
button.
43

Manual tuning

1
Set the input source to "TUNER".
(Main unit)
2
TUNER
Press the button on
the remote control unit to
select the TUNER mode.
3
Watching the display, press the
select the desired band (AM, FM or XM).
When listening to the XM Satellite Radio (
4 MODE
Press the button to set the manual tuning
mode.
Check that the display's "AUTO" indicator turns off.
5 TUNING
Press the button to tune in the desired
station.
The frequency changes continuously when the button is
held in.
• When in the auto tuning mode on the FM band, the "STEREO"
indicator lights on the display when a stereo broadcast is tuned
in. At open frequencies, the noise is muted and the "TUNED"
and "STEREO" indicators turn off.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the "STEREO" indicator turns off.
Basic Operation
(Remote control unit
in the AMP mode)
(Remote control unit)
BAND
button to
page 45).