Dsp Surround Simulation - Denon AVR-3806S Operating Instructions Manual

Basic Operation
SURROUND
7CH STEREO ENTER PARAMETER
DSP SIMULATION CURSOR
DSP SIMULATION
CURSOR
SURROUND
PARAMETER

DSP surround simulation

1
Select the surround mode for the input channel.
Example: DSP surround simulation mode
Example: 7CH STEREO mode
The surround mode switches in the following order each
time the DSP SIMULATION button is pressed:
WIDE SCREEN
VIRTUAL
7CH STEREO
MATRIX
VIDEO GAME
2
SURROUND PARAMETER
Press the
ENTER
• The surround parameter menu is displayed.
The screen for the selected surround mode appears.
(Remote control unit)
(Remote control unit)
SUPER STADIUM ROCK ARENA
JAZZ CLUB
MONO MOVIE CLASSIC CONCERT
button.
40
3
CURSOR D D H H
Press the or
various surround parameters.
4
CURSOR F F G G
Press the or button to adjust the
parameter settings.
5
ENTER SURROUND PARAMETER
Press the or
button to complete the setting.
• The "7CH STEREO" display changes as shown below
according to the surround back speaker setting.
SURROUND
BACK SPEAKER
ON
OFF
• When "Default" is selected and the CURSOR F F button is
pressed, "CINEMA EQ." and "D.COMP." are automatically
turned off, "ROOM SIZE" is set to "medium", "EFFECT
LEVEL" to "10", "DELAY TIME" to "30 ms" and "LFE" to "0
dB".
• The "ROOM SIZE" expresses the expansion effect for the
different surround modes in terms of the size of the sound
field, not the actual size of the listening room.
Basic Operation
button to select the
DISPLAY
7CH STEREO
5CH STEREO