Clearing Errors
3-9
Clearing Errors
1,2,3...
Note
52
If an error occurs, use the following procedure to clear the error and
then remove the cause of the error.
The ZEN must be connected and online for this operation.
1.
Select ZEN(Z)/Error Clear from the Menu Bar to clear the error.
2.
Repeat this step to clear multiple errors.
a)
Refer to Section 6 Troubleshooting in the ZEN Operation
Manual (Z183) for information on ZEN errors.
b)
ZEN errors that occur while online will be displayed in the
Status Bar.
Error display
Section 3-9