Protect Setting And Clearing Errors - Omron ZEN-SOFT01-V4 - 12-2008 Operation Manual

Protect Setting and Clearing Errors

6-3 Protect Setting and Clearing Errors
Error message
The password is incorrect.
The password was set
incorrectly.
Error message
No password is set. Set a
password, and try again.
70
Warning messages: A dialog box will be displayed warning of errors
in the password.
Probable cause
A different password has been
entered from the password that
was set under the password
settings or protect settings.
The password and the
reconfirmation of the password
differ or more or less than 4
digits were input as the
password.
Descriptive messages: A dialog box will be displayed prompting
operation. Follow the instructions given in the dialog box.
Probable cause
The ZEN protect operation has
been attempted while no
password has been set.
Section 6-3
Countermeasure
Re-enter the correct 4 digits set
under the password settings or
protect settings.
Enter the same 4 digits in both
the password and password
confirmation text boxes.
Countermeasure
Enter and reconfirm a
password under the password
settings and re-execute the
protect operation.