Omron ZEN-SOFT01-V4 - 12-2008 Operation Manual page 49

Editing Ladder Programs
When Copying
• Click the Copy Button on the Toolbar.
• Select Edit(E)/Copy(C) from the
Menu Bar.
• Right-click and select Copy.
When Copying
3. Any of the following methods can be used to paste inputs and
outputs after moving the cursor to desired position with the mouse
or cursor keys.
• Click the Paste Button on the Toolbar.
• Select Edit(E)/Paste(P) from the Menu Bar.
• Right-click and select Paste.
Note Either the pencil or arrow cursor can be used to copy, cut,
and paste individual objects.
When Moving
• Click the Cut Button on the Toolbar.
• Select Edit(E)/Cut(T) from the Menu
Bar.
• Right-click and select Cut.
When Moving
Section 2-4
31