Copying, Cutting, And Pasting Inputs And Outputs - Omron ZEN-SOFT01-V4 - 12-2008 Operation Manual

Editing Ladder Programs
1,2,3...
2-4-8

Copying, Cutting, and Pasting Inputs and Outputs

Copying, Cutting and Pasting Individual Objects
1,2,3...
30
Use the following procedure to create new connection lines.
1. Drag the mouse from the desired position to create a new line.
2. Use the mouse or Cursor Keys to move to the desired position for
the connection line and then use any of the following methods.
• Click the Insert Horizontal or Insert Vertical Button on the
Toolbar.
• Select Insert(I)/Horizontal(H) or Insert(I)/Vertical(V) from
the Menu Bar.
• Press the − or I Key on the keyboard.
Inputs and outputs within a specified range can be easily copied and
moved if the cut, copy, or paste functions are used.
1. Using the mouse or cursor keys, select the input or output that is
to be copied or cut.
2. Use any of the following procedures for copying and moving.
Section 2-4