Displaying Present Values; Changing Settings Online - Omron ZEN-SOFT01-V4 - 12-2008 Operation Manual

Monitoring Programs
3-7-2

Displaying Present Values

3-7-3

Changing Settings Online

1,2,3...
3. When the mode is changed to MONITOR, the closed circuits of
the ZEN ladder program are highlighted in green.
Present values, the ON/OFF status of inputs, etc., can be displayed
during monitoring of programs being executed by the ZEN.
During monitoring, moving the mouse or cursor to a timer/counter or
other output will cause the present value to be displayed in the Status
Bar.
Present value display
Set values can be changed while connected to the ZEN online.
1. While online, use either the mouse or the cursor keys to highlight
the output that is to be changed. Then use any of the following
methods to change the setting.
• Press the Enter Key or double-click.
• Select Edit(E)/Edit(E) from the Menu Bar.
Section 3-7
49