Table of Contents
Advertisement
Starting and Stopping the Simulation Function
5-1
Starting and Stopping the Simulation
Function
1,2,3...
Toolbar Button Functions
62
A ladder program created with the Support Software can be run by
the Support Software without transferring it to the ZEN.
1.
Display the ladder program for which operation is to be simulated
and then click the Start/Stop Simulator Button on the Toolbar or
select ZEN(Z)/Start/Stop Simulator from the Menu Bar.
Note Set values can be changed during simulation. For details,
refer to Changing Settings Online in 3-7 Monitoring
Programs.
2.
When the simulator is started, the background color will change
to yellow and the RUN, STOP, ZEN Image Display, Present
Value List Display, Clock Display, and Start/Stop Simulator
Buttons on the Toolbar will be enabled. Also, depending on the
content of the ladder program, the ZEN Image Window, the
Present Value List Window, and the Clock Window will be
opened.
3.
To start the simulation, click the RUN Button on the Toolbar.
To stop the simulation, click the STOP Button on the Toolbar.
To stop the simulator, click the Start/Stop Simulator Button on
4.
the Toolbar or select ZEN(Z)/Start/Stop Simulator from the
Menu Bar. The background color for the simulator view area will
change back to white.
RUN
STOP
ZEN Image Display
Executes the ladder program.
Stops the ladder program execution.
Specifies whether or not the ZEN Image
Window will be displayed.
Section 5-1
Hide quick links:
Advertisement
Chapters
Table of Contents
