Inputting Ladder Programs
2.
The Property Settings Screen will be displayed. Enter the ZEN
type, configuration (i.e., Expansion I/O Units), project name, and
comment, and then click the OK Button.
3.
An empty screen in ladder-view format will be displayed. Double-
click the mouse on the position for the first input condition.
Note Input positions for input and output bits can be set by using
the mouse or cursor keys to move to the input or output
position and then use any of the following methods.
• Press the Enter Key.
• Double-click.
• Click the Insert Input or Insert Output Button on the
Toolbar.
• Select Insert(I)/Contact (input bit)/Coil (output bit)
from the Menu Bar.
• Select Edit(E)/Edit(E) from the Menu Bar.
• Right-click and select Edit.
Section 2-2
17