Omron ZEN-SOFT01-V4 - 12-2008 Operation Manual page 39

Inputting Ladder Programs
10. The Edit Input Dialog Box will be displayed. Specify the bit type,
type of input, and bit number, and enter a comment if required,
just as you did in step 4.
Note The comment will be automatically displayed for bit types
and bit numbers that have comments.
11. Drag the mouse vertically to draw the connecting line.
Section 2-2
Bit name: Q
Input (Normally Open/Normally
Closed): Normally Open
Bit number: 0
Comment: CPU Unit output 0
(Up to 31 characters can be
entered.)
Comment color
21