Editing Ladder Programs
2-4-4
Inserting Inputs
26
3.
Change the bit type in the Edit Output Dialog Box from Q to M
(holding bit), specify the function and bit number, and enter a
comment if necessary.
4.
The output change has now been completed.
Input positions for input and output bits can be inserted by using the
mouse or cursor keys to move to the input or output position and then
• Press the Enter Key.
• Double-click.
• Click the Insert Input Button on the Toolbar.
• Select Insert(I)/Contact (input bit)/Coil (output bit) from the
Menu Bar.
• Select Edit(E)/Edit(E) from the Menu Bar.
• Right-click and select Edit.
Section 2-4