Editing Ladder Programs
When Copying
• Click the Copy Button on the Toolbar.
• Select Edit(E)/Copy(C) from the
Menu Bar.
• Right-click and select Copy.
When Copying
34
4.
Any of the following methods can be used to paste inputs and
outputs after moving the cursor to desired position with the mouse
or cursor keys.
• Click the Paste Button on the Toolbar.
• Select Edit(E)/Paste(P) from the Menu Bar.
• Right-click and select Paste.
Note A program saved in a ladder program file can be pasted
after copying the program and then starting up the ZEN
Support Software in a separate window.
When Moving
• Click the Cut Button on the Toolbar.
• Select Edit(E)/Cut(T) from the Menu
Bar.
• Right-click and select Cut.
When Moving
Section 2-4