List Of Supported Devices; Appendix B List Of Supported Devices; Power Supplies - Omron WT30 Operation Manual

Power Supplies

The following Switching Power Supply Units can be connected to the WT30.
Model
S8VS-01524@ (See note 1.)
S8VS-03024@ (See note 1.)
S8VS-06024@ (See note 1.)
S8VS-09024@
S8VS-12024@
S8VS-24024@
S8TS-06024@ (See notes 1 and 2.)
S82J-02524@ (See note 1.)
S82J-05024@ (See note 1.)
S82J-10024@
S82J-15024@
S82K-01524 (See note 1.)
S82K-03024 (See note 1.)
S82K-05024 (See note 1.)
S82K-09024 (See note 1.)
S82K-10024 (See note 1.)
S82K-24024
Note (1) These products are Class 2 power supplies according to UL standards.
(2) Class 2 is not satisfied if the Power Supply Units are operated in parallel.
WT30 Terminals require a 24-VDC power supply. Provide a power supply of at least 15 W, considering the
inrush current generated at startup. An OMRON Switching Power Supply Unit is recommended.
Appendix B

List of Supported Devices

Specifications
15 W or higher only
Manufacturer
OMRON
97