Slave Station Status - Omron WT30 Operation Manual

Slave Station Status

6-7

Slave Station Status

15 14 13 12 11 10
Note
90
The following diagram shows the structure of slave station status data.
9 8 7 6 5 4 3
The following table shows the status details.
Bit Status
position
0 Verification error
(serial number mis-
match)
1 Verification error (I/O
size mismatch)
2 Not used.
3 Not used.
4 Not used.
5 Not used.
6 Not used.
7 Communications via
Relay Station
8 Not used.
9 Serial number regis-
tration
10 Not used.
11 Not used.
12 Not used.
13 Not used.
14 Not used.
15 Not used.
Unused bits are always OFF (0).
Bit position
2 1 0
Verification error (serial number mismatch)
Verification error (I/O size mismatch)
Not used.
Not used.
Not used.
Not used.
Not used.
Communications via relay station
Not used.
Serial number registration
Not used.
Not used.
Not used.
Not used.
Not used.
Not used.
0
No error
No error
No relay
Not registered
Section 6-7
Bit description
1
Error
Error
Via relay
Registered