Omron WT30 Operation Manual page 3

Introduction
OMRON products are manufactured for use according to proper procedures by a qualified operator
and only for the purposes described in this manual.
Thank you for purchasing this WT30 FA Wireless SS Terminal (also referred to as WT30 or WT30 Ter-
minal in this manual).
The WT30 System consists of a Serial Master Station and I/O Slave Stations. The Serial Master Sta-
tion is a wireless terminal that collects ON/OFF data using wireless communications and is connected
to a device with an RS-232C interface (e.g., a personal computer or PLC). I/O Slave Stations with I/O
terminals can also be connected to a DeviceNet-compatible WD30 Master.
Intended Audience
This manual is intended for the following readers.
• Persons in charge of introducing FA devices
• Persons who design FA systems
• Persons who install or connect FA devices
• Persons who manage working FA installations
Persons who use this product must have sufficient knowledge of electrical systems (i.e., an electrical
engineer or the equivalent).
i