6-12 Serial Number Registration Status; 6-13 Compoway/F Communications - Omron WT30 Operation Manual

Serial Number Registration Status

6-12 Serial Number Registration Status

15 14 13 12 11 10

6-13 CompoWay/F Communications

Status
Read
80 81
RUN Read- Read-
mode only only
TEST Opera- Opera- Read-
mode tion error tion error only
SET Opera- Opera- Read-
mode tion error tion error only
EEPROM Opera- Opera- Opera-
error tion error tion error tion error
Initial No response
status
Note
The following diagram shows the structure of serial number registration sta-
tus. Serial number registration status indicates whether the serial number is
also registered when registering an I/O Slave Station. The serial number reg-
istration status for I/O Slave Stations from unit number 1 to 64 are stored in
addresses 0083H to 0086H of variable type 82.
Example: Serial Numbers for Unit Numbers 1 to 3 Are Registered
0000 0000 0000 0111
The value 0007H is stored in address 0083H.
9 8 7 6 5
The following table shows which commands are supported for each status.
Variable area
82 83 80 81
Read- Read-
only only
Read- Read- Opera-
only only tion error
Read- Opera-
only tion error
Opera- Opera- Opera-
tion error tion error tion error
The blank boxes indicate that a normal response is returned if the parameters
are enabled and the command is executed normally.
Bit position
4 3 2 1 0
Unit number 1:
Unit number 2:
Unit number 3:
Unit number 4:
Unit number 5:
Unit number 6:
Unit number 7:
Unit number 8:
Unit number 9:
Unit number 10:
Unit number 11:
Unit number 12:
Unit number 13:
Unit number 14:
Unit number 15:
Unit number 16:
READ
CON-
TROLLER
Write
DATA
82 83
Read- Opera-
only tion error
Read- Opera-
only tion error
Read-
only
Opera- Opera- Operation
tion error tion error error
Section 6-12
Serial Number Registration
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
0: No, 1: Yes
READ READ ECHO-
MACHINE CON- BACK
ATTRIBUTES TROLLER TEST
STATUS
Operation Operation Opera-
error error tion error
OPERATION
COMMANDS
Software
reset
No response,
but com-
mand is exe-
cuted
No response,
but com-
mand is exe-
cuted
No response,
but com-
mand is exe-
cuted
Operation
error
93