Omron WT30 Specification Sheet

FA Wireless SS Terminals
WT30
Construct a Wireless System for ON/OFF
Data Collection That Is Ideal for Monitoring
Production Site Equipment
• Wireless Slave Station equipped with I/O.
• Height of 90 mm and DIN Rail mounting enables installation in
control panels.
• Easily check wireless communications status from indicator
display.
• I/O Slave Stations can also be used as Slave Stations in WD30
systems.
• Conforms to radio wave standards for Japan, China (pending),
USA, and Europe.

Ordering Information

■ List of Models
Wireless Unit model
WT30-M01-FLK
WT30-SID16
WT30-SMD16
WT30-SMD16-1
Note: An Antenna and Mounting Brackets are not included with the Wireless SS Terminal.
■ Accessories
Antennas
Model
WT30-AT001 Magnet-base Antenna (2 antennas per set)
WT30-AT002 Flat Diversity Antenna (1 antenna)
WT30-AT003 Pencil Antenna (2 antennas per set)
Communications Cables
Model Length
XW2Z-0100U-3 1 m
XW2Z-0200U-3 2 m
XW2Z-0500U-3 5 m
XW2Z-0200U-5 2 m
XW2Z-0500U-5 5 m
Other
Model
WT30-FT001 DIN Rail Mounting Bracket (for TH35-7.5)
WT30-FT002 DIN Rail Mounting Bracket (for TH35-15)
WT30-FT003 Surface Mounting Bracket (screw-mounting)
(2 brackets per set)
WT30-FT011 Flat Diversity Antenna Mounting Brackets
(with magnets)
WT30-CA2M Antenna Extension Cable (1 cable, 2 m)
Type
Serial master
I/O slaves
Type
Application
For personal computer
Cross cable for PLC
Type
Specifications/No. of I/O points
RS-232C
16 DC inputs (NPN/PNP)
8 DC inputs (NPN/PNP) + 8 transistor outputs (NPN)
8 DC inputs (NPN/PNP) + 8 transistor outputs (PNP)
Applicable Standards
• FCC part 15.247 (USA)
• EN 300 440-2 (Europe)
• ARIB STD-T66 (Japan)
• (China) (approval pending)
Conformity to Safety Standards
Always use a Class 2 power supply to conform to UL standards.
Main Class 2 Power Supplies
OMRON Switching Power Supplies
• S8VS (15 W, 30 W, 60 W type)
• S82K (15 W, 30 W, 50 W, 90 W type)
Conformity to EN Standards
Use a DC power line less than 3 m to conform to EN standards. If a
power line of 3 m or longer is required, extend the length at the
Switching Power Supply's primary side (i.e., the AC power line).
Applicable Countries
Wireless standards have been met for the following countries. The
product cannot be used in any other countries.
Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungry, Iceland, Ireland, Italy,
Japan, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland,
UK, USA
FA Wireless SS Terminals
WT30
1