Editing Settings - Omron WS02-NCTC1-E - 07-2001 Operation Manual

Setting Editing Screens
4-2-2

Editing Settings

To Enter Settings
Selecting Items From
Drop-Down Lists
1,2,3...
Entering Settings Using
List Numbers
1,2,3...
To Move the Cursor
52
Menu items and functions will be as follows.
Menu item
Restore
Move
Size
Minimize
Maximize
Close
Next
All settings can be set by selecting items from the drop-down lists on the Set-
ting Editing Screens or by directly entering item list numbers. Use one of the
following procedures to set individual setting types.
1. On the Setting Editing Screen, select the setting to be made, and either
click the drop-down list arrow, or press the Space Bar.
Example: The following screen will be displayed when selecting from the
drop-down list on the Pulse Rate Screen
2. Select an item from the expanded drop-down list either by clicking on it di-
rectly, or by using the Up or Down Keys or entering its list number (0, 1, 2
etc.).
3. Press the Enter Key to collapse the list and set the settings.
1. In the Setting Editing Screen, enter the desired settings directly.
2. Press the Enter Key, or use the Up or Down Keys, to set the setting.
Note 1. Settings can be displayed in either hexadecimal or decimal format. (Refer
to 4-2-3 To Switch Settings Display Formats.)
2. When the Setting Editing Screen is active, the left-hand side of its status
bar will display the possible range for entries.
Possible range for entries is displayed
Press the Backspace Key before setting an entry to alter it.
Note If entering settings directly, decimal values must be entered starting with the
leading zero (i.e., 0.
Move the cursor in individual Setting Editing Screens either by using the Cur-
sor Keys or by clicking in the screen directly.
Restores minimized screens to the project window.
Moves screens.
Sizes screens.
Minimizes screens.
Maximizes screens.
Closes screens.
Activates next screen.
) , not with the decimal point (i.e., .
@ @
Section 4-2
Function
) .
@ @