Connecting To A Pc; Uninstalling Cx-Position Or Finsgateway - Omron WS02-NCTC1-E - 07-2001 Operation Manual

Connecting to a PC

2-1-2

Uninstalling CX-Position or FinsGateway

Uninstalling CX-Position
Uninstalling FinsGateway
2-2

Connecting to a PC

Use the following procedure to remove CX-Position from the computer.
1,2,3... 1. Click Start on the task bar and move the cursor to Settings.
2. Select Control Panel.
3. Double-click the Add/Remove Programs Icon.
4. The Add/Remove Programs Properties Dialog Box will be displayed. Se-
lect CX-Position from the Install/Uninstall List and click the Add/Remove
Button.
5. Click OK in the confirmation dialog box. CX-Position will be removed from
the computer.
Use the following procedure to remove FinsGateway from the computer.
1,2,3... 1. Click the Start on the task bar and move the cursor to Settings.
2. Select Control Panel.
3. Double-click the Add/Remove Programs Icon.
4. The Add/Remove Programs Properties Dialog Box will be displayed. Se-
lect OMRON FinsGateway + SerialUnit Embedded Edition from the In-
stall/Uninstall List and click the Add/Remove Button.
5. Click OK in the confirmation dialog box. FinsGateway will be removed from
the computer.
Note Do not attempt to uninstall CX-Position or FinsGateway Version 3 when they
are running. The uninstall operation may not be completed successfully.
Note If OMRON Support Software that communicates using CX-Server (e.g., CX-
Programmer, CX-Protocol, or CX-Motion) or an application that uses a special
serial driver is connected online, it is not possible to perform online operations
from CX-Position using the same COM port. Quit online connection for the
OMRON Support Software that communicates using CX-Server (e.g., CX-
Programmer, CX-Protocol, or CX-Motion) or the application that uses a spe-
cial serial driver, and then re-attempt online operations from CX-Position after
starting up FinsGateway's Serial Unit servicing.
CX-Position can be connected to the PC using any of the following methods.
Network type
Host Link (SYSWAY-
CV)
(See note.)
Ethernet
Note Connection is also possible to PCs on Controller Link, SYSMAC LINK, or
Ethernet networks via Host Link (using the PC's gateway functions).
Any FinsGateway Version 2 driver can be used.
FinsGateway Version 3 Embedded Edition is included with CX-Position. The
following explanation is for when FinsGateway Version 3 Embedded Edition is
used.
Use the following procedure to start up the FinsGateway communications
driver. For details, refer to 6-2 FinsGateway Configuration and Startup.
Computer port
RS-232C port
Ethernet port (or built-in port)
Section 2-2
FinsGateway
communications driver
Serial Unit driver
Ethernet driver
13