Uploading Data - Omron WS02-NCTC1-E - 07-2001 Operation Manual

Uploading Data

7-2

Uploading Data

7-2-1 Uploading Data
5. When download is complete, Transfer successful; Write flash memory? will
be displayed.
6. Click the OK Button.
Use the following procedure to upload NC Unit data to the (CX-Position) com-
puter.
1,2,3... 1. On the project tree, select the NC Unit to be uploaded from.
2. Select Online (L)/Upload (U).
3. Select the data to be uploaded under Data Type. To upload all data, select
All Data. To designate specific data to be uploaded, select Setting Data
and then the specific data.
Section 7-2
75