Omron WS02-NCTC1-E - 07-2001 Operation Manual page 79

FinsGateway Configuration and Startup
Configuring the Protocol
and Node
1,2,3...
70
For Host Link, the protocol must be changed to SYSWAY-CV from the default,
(SYSWAY). The node number must match the node number used when the
PC was added to CX-Position.
1. Click the Nodes Tab.
2. Set the node to 240 (shown in reverse video).
3. Click the Property Button.
4. Set the following configurations in the Add/Edit Serial Node Window.
• The node number must match the node number used under Networks
when the PC was added to CX-Position.
FinsGateway FinsGateway
default setting
Node... on the 240
Nodes Tab
Page.
• The Type can be left as C200H.
Adding PC to CX- PC addition default
Position
Node Number under 0
Network Settings
Must be set to 240 if
FinsGateway is the
default.
Section 6-2
setting