Omron WS02-NCTC1-E - 07-2001 Operation Manual page 81

FinsGateway Configuration and Startup
Online Operations from
the CX-Position
72
3. Normally when services are started, the status display changes to Run-
ning, and at the same time the × mark in the SerialUnit Icon disappears.
Online operations, such as data transfers, comparisons, and NC monitoring,
are executed from the CX-Position. The following operations can be done
later, as and when needed, from the Service Manager Icon.
1,2,3... 1. FinsGateway settings can be configured by right-clicking on the Service
Manager Icon, and selecting Setting/Configuration from the pop-up
menu.
2. Services can be ended by right-clicking on the Service Manager Icon, and
selecting End All Services from the pop-up menu.
Section 6-2