Omron GRT1-ML2 Hardware Reference Manual page 176

Hardware reference
/i
Axis Label Status AXIS_DISPLAY parameter
0
All run on The TJ1-MC__ recognises the TJ1-FL02
A A EN on Axis enabled.
flashing Axis error
off Axis disabled
A 0 on REG 0
A 1 on REG 1
B B EN on Axis enabled
flashing Axis error
off Axis disabled
B 0 on REG 0
B 1 on REG 1
3.10.3 TJ1-FL02 connections
The signals of the 15-pin connector depend on the type of interface
selected:
HARDWARE REFERENCE MANUAL
1 2 3
AUX OUT 0 Encoder A
Encoder Z OUT 1 Encoder B
AUX OUT 0 Encoder A
Encoder Z OUT 1 Encoder B
171